Garage floor concrete in Alabaster AL - a floor laid out so cracks land in the joints
Cracked, pitted or sunken garage floor? We'll tell you if a repair will hold, or pour a new floor that's jointed and cured right.
- Fully licensed and insured.
- Free estimates at your property.
- We reply within 1 business day.
Should you patch or replace your garage floor in Alabaster?
Garage floor concrete in Alabaster means placing and finishing a new concrete slab on the ground inside your garage, then curing it right after the pour. When the old floor is still sound enough to save, it can mean repairing it instead.
Most garage floor calls I get start with a crack that's grown, a section that's dropped or a top that's turned to dust and pits. The price mostly turns on the size of the garage, whether the old floor has to be broken out and hauled off, and whether a repair will do the job. The schedule turns on checking for a permit, getting a pour day the weather allows and the wait while the concrete cures, which is the time new concrete needs to harden before it takes weight. My estimate spells out what's included, so you know where the money goes before anything gets torn up.
How do you know your garage floor needs work?
A crack that keeps widening
A thin crack is normal in any slab, but one that gets wider every year tells you the floor is still moving. If you catch it while it's narrow, a repair usually holds. If you wait, the edges break down until patching won't.
One side higher than the other
When one edge of a crack sits higher, like a small step, the slab has broken and the pieces have shifted apart. That catches a floor jack or a rolling toolbox, and it's the kind of crack that usually means the section has to come out.
Pits and a dusty surface
If the top flakes, pits or leaves gray dust on your shoes, the floor was often finished in the heat or never cured properly. It won't get better on its own, and every year of tires wears it down further.
How we handle garage floor concrete
Some cracking is normal in any slab, so on a new floor we plan where the control joints go before we pour. Those are straight grooves cut into the slab that break it into smaller sections, so when it cracks, the crack lands in the groove instead of wandering across the middle. If the old floor is coming out, we break it up and haul it off. Then we set the forms, place and finish the concrete, cut the joints on time and start curing right away, because a floor left to dry out on its own ends up weaker on top. On an old cracked floor, I look at how wide the cracks are and how uneven the edges sit, and I tell you straight whether a repair will hold or the floor needs to come out.
Garage work often ties into other jobs around the house. If you want more than plain gray, a colored or patterned finish is part of our decorative concrete work, and it's easiest to plan before the pour. If the garage sits into a slope and dirt keeps washing down beside it, concrete retaining walls hold that ground back so it stays put.
Crack repair on a sound floor
This suits a floor that's mostly level, with narrow cracks and edges that still line up. It costs less than a new floor and keeps the garage usable, as long as the concrete around the crack is solid.
Tear out and pour new
This suits a floor with wide, offset cracks, sunken sections or a crumbling top. It's the bigger job, but it's the real fix when the slab has broken into pieces that move.
New floor in a new garage
This suits an addition or a detached garage going up from scratch. We plan the joints around the doors and walls from the start, so the floor is laid out for where it will crack.
Get a free estimate on your garage floor
We reply within one business day to set a time. I come out, look at the floor and the ground around it, and write a free estimate of what's included, with no obligation.
(659) 901-5011- Based in
- Alabaster, AL 35007
- Hours
- Mon–Fri: 8 AM–9 PM, Sat–Sun: 6 AM–9 PM
What happens after you call about your garage floor in Alabaster?
Here's how a garage floor job runs from your side, from the first call to the day you park on it again.
- +01
Call or send us a message
Call (659) 901-5011 or use the form, and we get back to you to set a time. Let us know if you think the old floor has to come out.
- +02
I look and write it up
I walk the floor, check the cracks and the ground, and write an estimate that spells out what's included. You see what you're paying for before you decide anything.
- +03
We set the permit and date
Once you say go, we line up any permit and pick a pour date the weather allows. On hot days we start early, because concrete placed in midday heat sets too fast and ends up weak on top.
- +04
We pour, cure and clean up
I'm on site with the crew from prep through cleanup, and curing starts as soon as the floor is finished. Before we leave, I tell you when it's ready to walk on and when it can take the car.
Why Alabaster homeowners call Alabaster Concrete for garage floors
If you're weighing a repair against a new floor, send us a message or call (659) 901-5011 and I'll come take a look.
I write every estimate myself
The person who looks at your cracks is the same one who runs the crew on pour day. Nothing gets lost between what I tell you in the garage and what we do on the slab.
Pouring around Alabaster since 2023
I started out pouring walks and small pads for neighbors around Alabaster on weekends, and turned it into a business in 2023 when the calls kept coming. Three years in, most of our calls still come from homeowners who need a driveway, patio or slab.
Fully licensed and insured
We're fully licensed and insured, so you're not carrying the risk if something goes wrong on site. Alabama's Home Builders Licensure Board covers most residential building, remodeling and repair work over $10,000, labor and materials included, so on a bigger garage job, ask any contractor you're weighing how they're covered.
Garage floors, slabs and permits in Alabaster
In Alabaster, the city's Building Official issues a permit before anyone builds, alters, repairs or demolishes a building or structure. That rule doesn't spell out garage floors, so we never assume either way, and we check with the permit office before we set a date. We're based in Alabaster and work in the cities around it, and a different office may handle your job if you live outside the city, which is why we check with the one over your address. When a permit is needed, we take care of the paperwork, or walk you through it if you're acting as your own contractor. The city's online permitting system lets you set up an account to submit, track and pay for permits.
What we see most on garage floors here are older slabs with a crack running across the middle where nobody cut a joint, and tops worn to dust where the floor was never cured. We see the same floors on jobs in Pelham and Helena, and we handle them the same way.
Questions about garage floor concrete in Alabaster
How much does it cost to replace a garage floor in Alabaster?
The cost comes down mostly to the size of the garage and whether the old floor has to be broken out and hauled away first. A repair on a sound floor costs less than a tear-out and new pour, while a decorative finish or a tight spot for the concrete truck adds to it. Call (659) 901-5011 and I'll write up what your floor needs.
Will my new concrete garage floor crack?
Probably a little, and that's normal, because some cracking and curling is expected in every slab on ground. What matters is where the cracks go, and a floor without control joints tends to crack at random, so ask any contractor where the joints will go on your floor. Fibers mixed into the concrete can also help, since they bridge a crack once it forms and keep it from opening as wide.
What is the best way to decide whether to patch or replace a cracked garage floor?
Measure the cracks, because one extension guide says cracks averaging 2 inches wide or less can be repaired, while wider cracks with one edge higher than the other, like a small cliff, are likely best cut out and poured again. That lines up with what I look for when I walk your floor.
How do I make sure my new garage floor is cured properly?
Ask the crew which curing method they'll use and when it starts. A concrete trade group advises curing right after the pour with a curing compound, seven days of steady soaking, a wet burlap or plastic cover, or curing paper. Each one keeps the concrete from drying out too fast, which is what leaves a weak, dusty top.
When can I seal a new concrete garage floor?
Wait until the concrete has cured, which one concrete supplier puts at 28 days after the pour at the least. Sealing after that helps the floor keep its look and hold up longer.
Who applies for a permit for garage floor work in Alabaster?
In Alabaster, the applicant is either a contractor licensed to do business in the city or the owner acting as their own contractor and supervising the work. If you go the owner route and hire a subcontractor, that sub needs a state license when their part of the job costs more than $10,000.00.
Related concrete work around your garage
Want the floor or the apron out front to look like more than plain gray? Color, patterns and finishes go in at the pour, so plan them early.
When the yard slopes down toward the garage or dirt keeps washing onto the driveway, a concrete wall holds the ground back where it belongs.
Cities we work in around Alabaster
Alabaster Concrete is based in Alabaster, Alabama, and works in the cities around it, including Hoover and Calera. The 12 cities below have their own pages, and if yours isn't listed, call and ask whether we come out your way.
Send us photos of your garage floor
A few photos of the cracks and the size of the garage help me tell on the first call whether it's likely a repair or a new pour.
Alabaster, AL